The experiment was conducted in the agriculture field of the International University of Business Agricultural and Technology (IUBAT), Dhaka, from January to June 2017 to find out the effect of different Rhizobium inoculations on soybean production. The experiment was set up in a Completely Randomized Design (CRD) with four replications. Eight Rhizobium inoculations and one control treatment were used in the study to assess the effect of different biofertilizers on soybean production. The findings of the study showed that Strain Bacteria (SB) 316 inoculant performed better in all aspects of growing parameters and yield components like nodulation, vegetative growth, and yield. However, the control treatment performed lowest in every parameter. As a result of the experiment, it could be concluded that Rhizobium inoculation has a significant effect on vegetative growth, nodulation, and yield component of soybean. The SB 316 inoculant has been found as the most effective Rhizobium inoculation in soybean production.
Soybean (Glycine max L.) is a globally important grain legume crop. Soybean is known as the golden beans of the 21st century. As a grain legume, it is graining important position in the agriculture of tropical count-ries, including Bangladesh. It has huge potentiality and has emerged as an important commercial oilseed crop in Bangladesh. In Bangladesh, the soybean is culti-vated mainly as pulses crops. The total annual pro-duction of global soybean in 2018 was 348 million metric tons (FAO, 2018). The major producers of soybean are Brazil, the United States, Argentina, China and India. The world average yield of soybean is 2.80 MT/ha (Lange Meier and Purdy, 2019) where our average yield is 1.59 MT/ha, which is much lower than the world average soybean production. Our soybean production yield is much lower than the world average soybean production. Imbalanced nutrition is one of the major obstacles to low soybean productivity in Bangladesh. The application of biofertilizer into the soil leads to increase soil fertility and crop productivity (Yadav and Sarkar, 2019). Rhizobium is one of the dominant symbiotic nitrogen-fixation bacteria. As most of our soils are poor in organic matter, response to fertilizer has not been higher due to the rapid fixa-tion of nutrients (Rabiul et al., 2020). Under such conditions, Rhizobium inoculation could be advan-tageous. To overcome these adverse effects the Rhizobium inoculation needs to be established with a high level of effectiveness. The application of Rhizo-bium inoculation increases plant growth, nutrient uptake and crop yields. Kazmi et al. (2005) reported that soybean seed inoculation by rhizobia bacteria significantly increases the yield. Effective bacteria add enough nitrogen by nodulation which is very important for the growth and development of the plant. It is also very crucial for improving soil fertility and pro-ductivity. The objective of the study is to find out the effects of different biofertilizer on soybean growth and yield.
The experiment was conducted in the agriculture field of International University of Business Agricultural and Technology (IUBAT), Dhaka, from January to June 2017. This experiment was performed to evaluate the effects of various biofertilizers on soybean pro-duction. The soil of the experiment was sandy loam. The experiment was set up in a Completely Rando-mized Design (CRD) with four replications. The crop used in the experiment was soybean (Glycine max) and the variety of the crop was BINA Soybean 3.
The study comprised of eight Rhizobium inoculants treatments such as T2: SB-66, T3: SB-321, T4: SB-306, T5: SB-316, T6: SB-343, T7: SB-394, T8: SB-433, T9: SB-212, and one control treatment T1 (with-out any treatment). TSP and MOP fertilizers were used as source of P and K nutrition. No nitrogenous ferti-lizer was used during the experimental period. The Strain Bacteria (SB) was prepared in the agricultural laboratory of IUBAT, Dhaka. Some molasses was also used with the Strain Bacteria. Molasses and Strain Bacteria were well mixed in a petri dish at the rate of 15 ml per kg and mixed well with the seeds thoro-ughly. For each treatment, a separate Petri dish and a separate hand globe were used to avoid contamination of the treatment. Seed inoculation was done on 02 February 2017 and inoculated seeds were shown in the field on the same afternoon. The spacing between the lines was 30 cm and between the plants was 5 cm. Intercultural operations were done for ensuring and maintaining the normal growth of the crop.
The crop was harvested on 13th May, 2017 by obser-ving the physiological maturity. The harvested plant materials were allowed to dry in the sun for 3 days. After drying, threshing and processing was done carefully on a plot basis. The data collection was done at different dates from different parameters and collected data were analyzed statistically by using computer software, Statistics 10.
The ultimate objective of crop production is its econo-mic yield. Seed yield is the major concern for soybean. The effects of biofertilizers on soybean production presented by their contributions to vegetative growth, nodulation, and yield.
Vegetative growth - The effect of different bioferti-lizer on the vegetative growth of soybean is measured in terms of plant height, weight and length. The effect of biofertilizer on vegetative growth of different treat-ments has shown that Rhizobium inoculation is more significant than the control treatment. Among the various Rhizobium inoculants, SB 316 treatment growth performance was a maximum in every aspect of growing parameters like plant height, shoot fresh weight, shoot dry weight, root length, root fresh weight, and root dry weight.
The Analysis of variance indicates that the Rhizobium inoculation has a significant effect on all plant growth parameters such as plant height, shoot fresh weight, shoot dry weight, root length, root fresh weight, and root dry weight. Among the various Rhizobium ino-culations, the SB 316 treatment significantly increased the plant height and root length by 142 cm and 50.75 cm, respectively. Similarly, a significant increase of 88 gm, 40.25 gm, and 12.25 gm was observed in the shoot dry weight, root fresh weight, and root dry weight, respectively. In contrast, to shoot fresh weight, SB 316 inoculant was less significant than other inoculations (Table 1). However, the lowest vege-tative growth performance was observed from the control treatment. The increased vegetative growth might be due to the increased metabolic activities and stimulation of root growth resulting in enhanced uptake of nutrients. Jaga and Sharma, (2005) agreed with these findings who reported that bio-fertilizer adds nutrient additionally and increase plant growth activity.
Nodule - Rhizobium inoculation has a significant effect on plant nodulation. Different Rhizobium ino-culation significantly influenced the number of nodule plant-1, nodule fresh weight plant-1, and nodule dry weight plant-1 (Fig 1). The highest number of nodules (57.5) recorded from SB 316 treatment. The maximum nodule fresh weight (27.75 gm) and nodule dry weight (3.4 gm) were also observed from SB 316 treatment. On the other hand, the lowest number of the nodule (26.25), nodule fresh weight (13.75 gm), and nodule dry weight (1.27 gm) were found from the control treatment (Fig 1).
Rhizobia strain significantly increases plant nodu-lation. Nodulation enhances the crop yield remarkably. The increased nodulation may due to effective sym-biosis between legume and rhizobia strains. Similar findings showed by Sultana et al. (2014) and Egam-berdiyeva et al. (2004), who reported that soybean inoculation significantly increased the nodulation that affected the yield. The result of the experiment indi-cates that Rhizobium inoculation influenced the soy-bean inoculation significantly. SB 316 showed the maximum nodulations.
Yield - Soybean crop yield is considered by its fruit number, the number of seeds, and seeds weight. The result presented in Table 2 shows that the yield and yield attributes were significantly affected by the different Rhizobium inoculations. The highest number of fruits, number of seeds, and 100 seed weights were 216.8, 420, and 12 gm, respectively, which is obtained from SB 316 inoculation. Similarly, the maximum yield/plant and yield/ha were also found from the SB 316 inoculation. The highest yield/plant and yield/ha were 50.4 gm/plant and 2.71 t/ha, respectively, while the minimum was 19.6 gm/plant and 1.05 t/ha, which are found from the control treatment.
Rhizobium inoculations have a significant effect on soybean growth and yield. Rhizobium inoculation enhances the metabolism of the soybean plant, which promotes growth and nodulation. The resulting of better growth offers a healthy yield. In this study, SB 316 treatment was found to be the most significant inoculation for soybean production compared to other inoculations.
The study was conducted to detect the effect of different biofertilizers on soybean growth and yield. Rhizobium inoculation enhances the metabolism of plants which increases the growth and yield of soy-bean. In this study, the effects of Rhizobium ino-culation were found to be significantly higher than in control treatment. SB 316 was the most effective inoculation compared to other treatments used in the study that significantly increased plant growth, nodulation, and yield component.
The authors would like to express their gratitude to College of Agricultural Sciences, International University of Business Agriculture and Technology (IUBAT), Dhaka, Bangladesh for theirconstructive cooperation throughout the research work.
The authors declared there are no conflicts of interest in publishing the research work.
Dr. Phelipe Magalhães Duarte, Professor, Department of Veterinary, Faculty of Biological and Health Sciences, University of Cuiabá, Mato Grosso, Brazil.
Centre for Global Environmental Culture (CGEC) and Program on Education for Sustainability Coordinator, International University of Business Agriculture and Technology (IUBAT), Dhaka, Bangladesh.
Islam MN, Sharmin S, and Rahman MA. (2021). Effects of different biofertilizer on soybean (Glycine max) production. Am. J. Pure Appl. Sci., 3(3), 55-59.
https://doi.org/10.34104/ajpab.021.055059